产品资料

低温脆性测定仪

如果您对该产品感兴趣的话,可以
产品名称: 低温脆性测定仪
产品型号: TS-15256
产品展商: 祥微
产品文档: 无相关文档

简单介绍

TS硫化橡胶低温脆性测定仪是测出在硫化橡胶和塑料的低温环境中冲击脆化温度和冲击脆化临界温度的试验机。TS硫化橡胶低温脆性测定仪试验片装载夹具有只装一组的单组型和可安装四组的多组型。冷却方式为压缩机制冷。


低温脆性测定仪  的详细介绍

硫化橡胶低温脆性测定仪是测出在硫化橡胶和塑料的低温环境中冲击脆化温度和冲击脆化临界温度的试验机。试验片装载夹具有只装一组的单组型和可安装四组的多组型。冷却方式为压缩机制冷。

A multi sample low temperature brittleness tester is a test machine to measure the impact embrittlement temperature and the critical temperature in the low temperature environment of vulcanized rubber and plastic.

Test piece loading clamp has only a single type and multiple karyotypes of four groups to install.

Cooling method for compressor refrigeration.

单组型具有4组试料夹具装置,可以同时安装20个试验片。

Single type has 4 sets of sample clamping device can be installed at the same time, the 20 test pieces.

在试料没在冷冻机里的情况下,只改变刻度盘就可以进行测试。

In the sample was not in the freezer case, only change the dial can be tested.
多组型(型)通过转换卡盘托架底座可以连续的进行样品测试,可以节省样品放回原处时间,满足很多样品各自的测试标准。 

Multiple genomes (type) through the conversion of the chuck bracket base can be continuous sample test, can save samples to replace the time, meet a lot of samples of the respective test standard.
低温脆性测定仪适用标准

Standard for the application of multi - Sample low temperature brittleness
JIS K6261 ISO812 (硫化橡胶低温测试方法-低温脆化冲击试验)

K6261 ISO812 JIS (test method for vulcanized rubber -- low temperature embrittlement impact test)
JIS K7216 (塑料低温脆化测试方法)

K7216 JIS (plastic low temperature embrittlement test method)
JIS K6261、K7216、ASTM-D746、ISO-974
Sample size and shape 样品尺寸及形状
按照JIS K6261 ISO812 (硫化橡胶低温测试方法-低温脆化冲击试验)
JIS K7216 (塑料低温脆化测试方法)
JIS K6261、K7216、ASTM-D746、ISO-974规定

K6261 K7216, JIS, ASTM-D746, ISO-974
Size and shape Sample sample size and shape
In accordance with K6261 ISO812 JIS (vulcanized rubber cryogenic test method - low temperature embrittlement impact test)
K7216 JIS (plastic low temperature embrittlement test method)
K6261 JIS, K7216, ASTM-D746, ISO-974
低温脆性测定仪技术参数:
样品卡盘 :可以同时夹持5个样品的夹具(多组型可以同时夹持20个样品)
冲击锤速度:1.4—2.4m/sec(可调) 数字显示 0.00m/sec
冲击锤顶部半径范围:1.6±0.1mm
低温槽:不锈钢制造(内部)
                包含搅拌器
热介质:主要使用乙醇
温度范围:-70℃ ~ 20℃
冷却系统:覆叠压缩机制冷

温度上升系统:1.5KW加热器 
温度控制系统:数字温度控制器 
样品调节计时器:数字式计时器 
安全装置:漏电电流断路器,过热保护器
橡胶低温脆性测定仪主要特点:
卡盘转换部分
在90度角时,4组卡盘能够安装径向形, 当旋转手柄时,转换卡盘能够启动进入打击测试状态。
样品打击状态Sample striking position
在规定的速度下,通过交替打击锤打击卡盘里样品夹中的样品。
试验槽(低温槽)
通过利用双重的冷动机系统可以冷却到-70℃。
控制部分
电子电路,设备依照给定的过程进行程序控制,是机器内部固有的

橡胶低温脆性测定仪相关资料

Technology parameter of multi sample low temperature brittleness:
Chuck: sample fixture can simultaneously hold 5 samples (multi pattern can also hold 20 samples)
Impact hammer speed: 1.4 - 2.4m/sec (adjustable) digital display 0.00m/sec
Impact hammer top radius range: 1.6 + 0.1mm
Cryogenic tank: stainless steel (internal)
Include agitator
Heat medium: the main use of ethanol
Temperature range: -70 to 20
Cooling system: the compressor refrigeration
Temperature rise system: 1.5KW heater
Temperature control system: digital temperature controller
Sample adjustment timer: Digital Timer
Safety device: leakage current circuit breaker, overheat protector
The main characteristics of the multi sample low temperature brittleness test instrument:
Chuck conversion part
At an angle of 90 degrees, 4 groups of chuck to radial installation, when the handle is rotated, chuck to boot into combat test status.
Sample striking position Sample
In terms of speed, by alternately blow hammer in the sample sample clamp chuck.
Test trough (cryogenic tank)
It can be cooled down to -70 by using a double cooling system.
Control section
Electronic circuit, the equipment according to the process of a given process control, is inherent in the machine
Correlation data of multi sample low temperature brittleness test instrument
15256-94 1.GB/T determination of low temperature brittleness of vulcanized rubber (multi sample method)
2 Determination of low temperature brittleness of GB/T1682-94 vulcanized rubber (single specimen method)


1.GB/T 15256-94 硫化橡胶低温脆性的测定(多试样法)
2 GB/T1682-94  硫化橡胶低温脆性的测定(单试样法)

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!